- Wireless CarPlay / Android Auto
- 4G
- QLED
£339.00Was £399.00inc. VAT, free delivery
In stock
- Wireless CarPlay / Android Auto
- 4G
- QLED
Image 1 of 13.
Mercedes E-Class C207 A207 RHD 10.25 inch Android Screen with Wireless CarPlay and 4G
SKU: QAM1240M12ECR
£509.00
Check if this fits your car
In stock
1
- Navway, UK car stereo specialists since 2014
- 5,000+ customers
- UK support Mon–Fri
SKU: QAM1240M12ECR
Key specifications
- Operating system
- Android 13
- Processor
- 12nm Octa-core chip
- CPU cores
- (2xCortex-A75 2.0GHz + 6xCortex-A55)
- Memory
- 8GB DDR4 RAM and 128GB Solid State ROM
- Screen size
- 10.25″
- Screen type
- QLED Screen
Functions
- Wireless Apple CarPlay: read more below
- Android Auto: read more below
- DSP sound processor: read more below
- 4G LTE: read more below
- Wi-Fi: read more below
- QLED screen: read more below
- IPS screen: read more below
- Screen mirroring: read more below
- RCA pre-outputs: read more below
- GPS navigation: read more below
- USB: read more below
- External microphone: read more below
What you need to fit this
1 · In the box
- 1 x 4G Antenna
- 1 x Audio Box
- 1 x Audio Cable
- 1 x GPS Antenna
- 1 x Installation Instructions
- 1 x ISO Wiring Harness
- 1 x Tweezers
- 1 x USB Cable
- 1 x User Manual
- Face Panel (All)
The XTRONS QAM1240M12ECR is a 10.25 inch Android 13 screen made as a plug-and-play replacement for the factory display in right-hand drive Mercedes-Benz E-Class C207 Coupe and A207 Convertible models (2009-2012) with COMAND APS NTG4.0. It keeps your CD player, radio and COMAND, and adds wireless CarPlay, Android Auto and a built-in 4G module.
- Keeps the factory CD player, radio and COMAND system
- Wireless CarPlay, and Android Auto wireless or wired
- 10.25 inch QLED screen with IPS viewing angles
- Built-in 4G module for its own internet connection with a SIM card
- 12nm octa-core chip with 8GB DDR4 RAM and 128GB storage
Works with the original COMAND system
The screen is matched to the Mercedes dashboard and runs Android alongside the original system, so you don't have to remove the CD player, radio or COMAND. Swipe on the screen to move between Android and the factory system.
It only works with the original C207/A207 COMAND APS NTG4.0 system, which has a 10-pin LVDS port or the New Telematic Generation 4.0 interface, and this version is for right-hand drive cars.
Wireless Apple CarPlay
CarPlay connects wirelessly, so your iPhone's maps, calls and music come up on the 10.25 inch screen without plugging in. Siri voice commands let you ask for directions or a song while you drive.
Your iPhone connects on its own when you start the car, so there's no cable to plug in. It needs an iPhone with wireless CarPlay support; check yours in Settings > General > CarPlay. A cable still works when you'd rather charge on the way.
Android Auto, wireless or wired
Android Auto works wirelessly or over a cable. Google Maps, calls and music apps run on the dashboard, with Google Assistant for voice control.
Maps, calls, messages and music from your Android phone appear on the car screen, with Google Assistant for voice control. It needs a phone with Google services, which most Android phones have. To connect without a cable, the phone must support wireless Android Auto too.
10.25 inch QLED screen
The 10.25 inch QLED screen gives strong, vivid colour, so maps and album art are easy to read at a glance.
IPS viewing angles
The IPS panel keeps its colour when seen from the side, so the front passenger gets as clear a view as the driver.
Built-in 4G
The independent 4G module gives the unit its own internet connection once you insert a SIM card (bought separately), and you can share it as a hotspot.
A SIM card in the head unit gives it its own internet connection for maps, traffic and streaming, so it doesn't need your phone's hotspot. You supply the SIM and the data plan; a data-only SIM is usually the cheapest way to do it.
Wi-Fi
Wi-Fi lets the unit join a hotspot or your home network for app downloads and updates.
Screen mirroring
Screen mirroring puts your phone's display on the dashboard, useful for apps that don't run in CarPlay or Android Auto.
Mirroring shows your phone's whole screen on the car screen, unlike CarPlay and Android Auto, which show apps designed for driving. It usually needs a companion app on the phone, and paid video streaming apps often block it.
DSP sound settings
A built-in DSP lets you adjust how the unit's audio sounds in the car.
The sound processor lets you tune the sound to your car: an equaliser, a delay for each speaker so the sound centres on your seat, and crossovers that keep deep bass away from small speakers. Start from a preset and change one setting at a time.
RCA audio output
An RCA audio output lets you connect an external amplifier if you want to add to the system later.
RCA pre-outputs send a clean, low-level signal to an external amplifier or subwoofer. Count the channels you need (front, rear and sub) against the outputs in the specifications. You'll also need RCA leads and power wiring for the amplifier.
USB
USB gives a wired connection for Android Auto and a way to play media from a USB stick.
Microphone for calls and voice
The unit has a microphone for hands-free calls and for Siri or Google Assistant voice commands.
Processor and memory
A 12nm octa-core chip with two Cortex-A75 cores at 2.0GHz and six Cortex-A55 cores runs Android 13 with 8GB DDR4 RAM and 128GB of solid state storage, so navigation, music and apps run together without long waits.
What's in the box
- 1 x 4G Antenna
- 1 x Audio Box
- 1 x Audio Cable
- 1 x GPS Antenna
- 1 x Installation Instructions
- 1 x ISO Wiring Harness
- 1 x Tweezers
- 1 x USB Cable
- 1 x User Manual
- Face Panel (All)
| Operating system | Android 13 |
|---|---|
| Processor | 12nm Octa-core chip |
| CPU cores | (2xCortex-A75 2.0GHz + 6xCortex-A55) |
| Memory | 8GB DDR4 RAM and 128GB Solid State ROM |
| Screen size | 10.25″ |
|---|---|
| Screen type | QLED Screen |
| Panel | IPS Screen |
| Phone connection | CarAutoPlay supports wireless connection and Android Auto supports both wireless and wired connections. |
|---|---|
| Mobile data | 4G module |
| Wi-Fi | Wi-Fi |
| Audio output | RCA Audio Output |
- Mercedes-Benz E-Class (2002-2023)
- For Mercedes-Benz E-Class 2-door coupe C207 (2009-2012) - Right Hand Driving
- For Mercedes-Benz E-Class 2-door convertible A207 (2009-2012) - Right Hand Driving
- This unit ONLY works with the original E-class 2-door C207/A207 COMAND APS NTG4.0 system which has the following features: a 10-pin LVDS port or a New Telematic Generation 4.0 UI.
- If your car comes with AMI port, you need connect AMI cable to ISO cable "audio in" port. (AMI cable and extension cable provided in the package.)
| Make | Model | Years | Notes |
|---|---|---|---|
| Mercedes-Benz | E-Class | 2002–2023 |
This is a plug-and-play replacement for the factory display in right-hand drive C207 and A207 cars with COMAND APS NTG4.0, and it connects with the supplied ISO wiring harness, audio box and audio cable. If your car has an AMI port, connect the AMI cable to the ISO cable's audio in port.
How do I know if my car has NTG4.0?
An NTG4.0 system has a 10-pin LVDS port or the New Telematic Generation 4.0 interface.
Is it for left-hand drive cars?
No. This version is for right-hand drive C207 and A207 models.
Do I keep COMAND and the CD player?
Yes. The unit works alongside the original system, so the CD player, radio and COMAND stay.
Is a SIM card included?
No. Insert your own SIM card to use the built-in 4G module.
