inc. VAT
+ £4.99 delivery = £54.98 total
In stock
Image 1 of 3.
Universal USB TPMS Tyre Pressure Monitoring System with Internal Sensors for XTRONS Units
SKU: ICE/ACS/TPMS08
£63.99
Check if this fits your car
In stock
1
- Navway, UK car stereo specialists since 2014
- 5,000+ customers
- UK support Mon–Fri
SKU: ICE/ACS/TPMS08
Functions
A tyre pressure monitoring kit with internal sensors and a USB receiver, made for XTRONS Android head units. It shows each tyre's pressure and temperature on the head unit and warns you of leaks, high or low pressure and high temperature.
- Real-time tyre pressure and temperature on the head unit screen
- Alerts for a leaking tyre, high pressure, low pressure and high temperature
- USB receiver connects to the head unit
- Internal sensors fit inside the tyre in place of the valve
Tyre pressures on your head unit
Sensors inside each tyre measure pressure and temperature and send the readings to a receiver, so you can check all four tyres on the head unit screen as you drive.
If a tyre starts leaking, or pressure or temperature goes too high or too low, it raises an alert. Spotting a slow puncture early means you can top up or get it repaired before it becomes a flat, and keeping tyres at the right pressure helps with wear and fuel use.
The head unit shows each tyre's pressure and warns you when one drops. It needs a TPMS kit: a receiver and a sensor for each wheel. Cap sensors screw on in minutes, while internal sensors are fitted by a tyre shop.
Which head units it works with
It's made for XTRONS IA, ID, IM, IP, IQ, IX, PX, UA, QA, QB, QD, QL, QG, QIR, QT and QW series head units. Check your head unit is in one of these series before ordering.
Universal: fits most cars. Check the dimensions in the specifications against your dash.
- Perfect Fit for XTRONS IA/ID/IM/IP/IQ/IX/PX/UA/QA/QB/QD/QL/QG/QIR/QT/QW Series head units.
The sensors go inside the tyres: the original valve is removed, the sensor is fitted in its place, the tyre is inflated and the nut and valve cap are screwed on. Each wheel then needs dynamic balancing with weights, so it's a job for a tyre fitter or someone with balancing equipment.
Will it work with my head unit?
It's made for XTRONS IA, ID, IM, IP, IQ, IX, PX, UA, QA, QB, QD, QL, QG, QIR, QT and QW series head units.
What does it warn me about?
A leaking tyre, high pressure, low pressure and high temperature.
Do the wheels need balancing after fitting?
Yes. Because the sensors go inside the tyres, each wheel needs a dynamic balance test and weights afterwards.
Full specification from XTRONS
XTRONS's own pages for this product, as the manufacturer publishes them. Open any of them at full size to zoom in.
