
+ £4.99 delivery = £54.98 total
In stock
Your car: not set. Add it and every product shows whether it fits.
Image 1 of 4.
SKU: ACTPMSTSLF
£129.99
Check if this fits your car
SKU: ACTPMSTSLF
A set of 4 Bluetooth tyre pressure sensors for the Tesla Model 3, to replace worn or missing ones. They come pre-paired, so they report pressure and temperature to the car's own monitoring system without any programming.
Each sensor sits in a wheel and reports that tyre's pressure and temperature while you drive. A slow puncture or a tyre that's dropped a few PSI shows up on the car's monitoring system, rather than when the tyre looks flat.
Pressure readings are accurate to ±0.72 PSI, which is close enough to set pressures properly before a long run.
The head unit shows each tyre's pressure and warns you when one drops. It needs a TPMS kit: a receiver and a sensor for each wheel. Cap sensors screw on in minutes, while internal sensors are fitted by a tyre shop.
The sensors arrive already paired, so they don't need a programming tool once they're in the wheels. They send their readings over Bluetooth straight to the car's own monitoring system.
They work across -40°C to +120°C, and the battery lasts up to five years.
| Pressure accuracy | ±0.72 PSI |
|---|---|
| Operating temperature | -40°C to +120°C |
| Battery life | up to five years |
| Make | Model | Years | Notes |
|---|---|---|---|
| Tesla | Model 3 | All years |
The sensors replace the existing tyre pressure sensors in the wheels, which is normally a job for a tyre fitter. As they come pre-paired, no programming is needed afterwards.
No. They come pre-paired and send their readings over Bluetooth to the car's monitoring system.
They're listed for the Tesla Model 3. If you drive a Model Y, S or X, check with us that your car uses Bluetooth sensors before ordering.
Up to five years.
XTRONS's own pages for this product, as the manufacturer publishes them. Open any of them at full size to zoom in.
From the same range

+ £4.99 delivery = £54.98 total
In stock

In stock