
Tesla Model 3 Bluetooth TPMS Sensors, Set of 4, Pre-Paired | ACTPMSTSLF
In stock · Free delivery
Your car: not set. Add it and every product shows whether it fits.
Image 1 of 4.
SKU: ACTPMSTSL
£49.99
+ £4.99 delivery = £54.98 total
Check if this fits your car
SKU: ACTPMSTSL
An OE-style Bluetooth tyre pressure sensor for the Tesla Model 3, for replacing a failed sensor or fitting a new set of wheels. It arrives pre-paired, so the car's own monitoring system can read it without any programming.
The sensor sits in the wheel and keeps sending pressure and temperature readings while you drive. If a tyre starts to lose air, the car's monitoring system picks up the change quickly, so you can deal with a slow puncture before it becomes a flat.
Pressure readings are accurate to ±0.72 PSI.
The head unit shows each tyre's pressure and warns you when one drops. It needs a TPMS kit: a receiver and a sensor for each wheel. Cap sensors screw on in minutes, while internal sensors are fitted by a tyre shop.
It talks to the car over Bluetooth and comes already paired, so there's no coding or programming step once it's fitted. That makes it a straight swap for a sensor that has stopped reporting.
It's built to keep working through hot and cold weather, with an operating range of -40°C to +120°C. The battery lasts up to five years.
| Pressure accuracy | ±0.72 PSI |
|---|---|
| Operating temperature | -40°C to +120°C |
| Battery life | up to five years |
| Make | Model | Years | Notes |
|---|---|---|---|
| Tesla | Model 3 | All years |
The sensor fits in the wheel in place of the original tyre pressure sensor. It comes pre-paired and needs no additional programming, so the car recognises it once it's installed.
No. It comes pre-paired and ready to install, with no additional programming.
Tyre pressure and temperature, with pressure readings accurate to ±0.72 PSI.
Up to five years.
XTRONS's own pages for this product, as the manufacturer publishes them.

From the same range