Image 1 of 2.
In stock
Universal 12V FM/AM Radio Signal Amplifier with FAKRA II Connector | EC/ARL/RAMP02
SKU: EC/ARL/RAMP02
£11.99
Check if this fits your car
1
Key specifications
- Voltage
- 12V
- Power connection
- Red wire connects to power antenna lead or 12V source
- Protection
- DC and AC short circuit protection
- Connector
- FAKRA II Connector
- Power cable length
- approximately 50cm
- Amplifier size
- 5.3×3.3×1.5cm
A small 12V radio signal amplifier with a FAKRA II connector that boosts FM and AM reception from your car's aerial. It helps where the signal is weak, though it can't create one where the aerial picks up nothing.
- Boosts reception for both AM and FM stations
- FAKRA II connector
- DC and AC short circuit protection
- Compact 5.3×3.3×1.5cm body
Stronger radio reception
The amplifier sits in the aerial line and strengthens the FM and AM signal before it reaches the radio, which helps stations hold on in areas with patchy coverage.
It can only boost a signal that's already there. If the aerial gets very poor reception or none at all, the amplifier won't fix it, so check the aerial itself first.
Wiring it in
It runs on 12V. The red wire connects to the power antenna lead or a 12V source, and the power cable is approximately 50cm long. Short circuit protection guards against DC and AC faults.
Check your aerial lead uses a FAKRA II connector before ordering.
What's in the box
- 1 x Amplifier
- 1 x Clip
- 1 x Sticker
| Voltage | 12V |
|---|---|
| Power connection | Red wire connects to power antenna lead or 12V source |
| Protection | DC and AC short circuit protection |
| Connector | FAKRA II Connector |
|---|---|
| Power cable length | approximately 50cm |
| Amplifier size | 5.3×3.3×1.5cm |
Universal: fits most cars. Check the dimensions in the specifications against your dash.
- Note: This item is used for increasing the signal reception, if the antenna reception is poor or there is no signal, it will not work.
Connect the amplifier in the aerial line with its FAKRA II connector, then wire the red lead to the power antenna lead or a 12V source. The clip and sticker help you secure it behind the dashboard.
Will it fix a radio with no reception?
No. It boosts a weak signal, but if the aerial has very poor reception or no signal, it won't work.
Does it work for AM as well as FM?
Yes, it works for both AM and FM stations.
How is it powered?
From 12V. The red wire connects to the power antenna lead or a 12V source.
Reviews
What customers say
Bought this product? Sign in to write a review.
Full specification from XTRONS
XTRONS's own pages for this product, as the manufacturer publishes them. Open any of them at full size to zoom in.
