Image 1 of 3.
Universal 1 to 3 Channel RCA Video Signal Booster and Splitter
SKU: ICE/ACS/BOS004
£9.99
+ £4.99 delivery = £14.98 total
Check if this fits your car
In stock
1
- Navway, UK car stereo specialists since 2014
- 5,000+ customers
- UK support Mon–Fri
SKU: ICE/ACS/BOS004
Key specifications
- Channels
- 1 Input, 3 Outputs
- Power supply
- 12V
Functions
What you need to fit this
1 · In the box
- 1 x 1 to 3 Channels Video Signal Booster
- 1 x User Manual
A compact RCA video booster that splits one video source to up to three monitors, such as two headrest screens and a roof screen. It boosts the signal so each screen gets a clear picture rather than a fuzzy one.
- 1 input, 3 outputs for up to 3 monitors from one source
- Boosts the signal so headrest screens stay sharp
- Compact, slim body that's easy to tuck away
- Runs on a 12V supply
One video source, three clear screens
Split a head unit's video output straight to two headrest screens, or chain one headrest to the next, and the picture gets fuzzy because the signal weakens. This booster sits in between, taking one RCA video input and sending a boosted signal to up to three monitors.
It suits in-dash monitors, roof monitors and headrest screens.
RCA pre-outputs send a clean, low-level signal to an external amplifier or subwoofer. Count the channels you need (front, rear and sub) against the outputs in the specifications. You'll also need RCA leads and power wiring for the amplifier.
Small and easy to fit
The slim body is about 1/5 the size of other video signal boosters, so it can hide behind trim or under a seat. It runs on a 12V supply. Check that your screens use RCA video inputs before ordering.
What's in the box
- 1 x 1 to 3 Channels Video Signal Booster
- 1 x User Manual
| Channels | 1 Input, 3 Outputs |
|---|---|
| Power supply | 12V |
Universal: fits most cars. Check the dimensions in the specifications against your dash.
- Ideal for any in dash monitors, car roof monitors, headrests monitors installation
Connect the head unit's RCA video output to the booster's input and run a lead from each output to a monitor. The booster needs a 12V power supply.
How many screens can I connect?
Up to 3 monitors from a single video source.
Why not just split the cable?
Splitting or chaining the signal without a booster leaves the picture fuzzy on the headrest screens. The booster keeps it as clear as on the head unit.
Full specification from XTRONS
XTRONS's own pages for this product, as the manufacturer publishes them. Open any of them at full size to zoom in.
