inc. VAT
+ £4.99 delivery = £16.98 total
In stock
Image 1 of 7.
Universal Clip-on Microphone with 3m Cable and 3.5mm Jack
SKU: ACMIC005
£11.99
+ £4.99 delivery = £16.98 total
Check if this fits your car
In stock
1
- Navway, UK car stereo specialists since 2014
- 5,000+ customers
- UK support Mon–Fri
SKU: ACMIC005
Key specifications
- Directivity
- Omni directional
- Sensitivity
- -30db ± 2db
- Signal to noise ratio
- 58dBA
- Max input sound level
- 110dB
- Output impedance
- 2.2 kΩ
- Current consumption
- 500uA
Functions
What you need to fit this
1 · In the box
- 1 x Microphone
- 1 x Foam Cap
- 1 x Clip
- 1 x Adapter
A clip-on omnidirectional microphone with a 3m cable and a 3.5mm jack. Plugged into a car head unit's microphone input, it picks up your voice more clearly for hands-free calls, and it also works with phones, tablets, PCs and cameras.
- 360° omnidirectional pickup with background noise reduction
- 3m cable, long enough to route to a pillar or headlining
- Works with 3 pole TRS and 4 pole TRRS sockets, adapter included
Clearer hands-free calls
This microphone clips on near you, so the person on the other end hears your voice rather than road noise. It picks up sound from all directions and has noise-cancellation to cut background noise.
The 3m cable gives room to route it neatly from the head unit to a spot close to the driver.
Plugs into any 3.5mm socket
It has a silver-plated 3.5mm TRRS jack and comes with a 3.5mm TRRS to TRS jack adapter, so it suits both 3 pole and 4 pole sockets. Check that your head unit has a 3.5mm microphone input before ordering.
What's in the box
- 1 x Microphone
- 1 x Foam Cap
- 1 x Clip
- 1 x Adapter
| Directivity | Omni directional |
|---|---|
| Sensitivity | -30db ± 2db |
| Signal to noise ratio | 58dBA |
| Max input sound level | 110dB |
| Output impedance | 2.2 kΩ |
| Current consumption | 500uA |
| Dimensions | Φ6.0×5.0(H)mm |
|---|---|
| Cable length | 3m |
| Plug type | 3.5mm |
Universal: fits most cars. Check the dimensions in the specifications against your dash.
- PCs / Tablets / Mobile Phones / Car Head Units / Cameras / Camcorders
Plug the microphone into your head unit's 3.5mm microphone input, using the supplied TRRS to TRS adapter if your socket needs it. Clip it somewhere close to the driver and route the 3m cable behind the trim.
Will it work with my head unit?
It works with devices that have a 3.5mm audio jack, with either a 3 pole TRS or 4 pole TRRS socket thanks to the included adapter.
How long is the cable?
3m.
Does it reduce road noise?
It has noise-cancellation technology that reduces background noise and interference.
Full specification from XTRONS
XTRONS's own pages for this product, as the manufacturer publishes them. Open any of them at full size to zoom in.
